1.Xiaojing Xu, Honghong Shao, Jianchang Gao, Kangmin Chen, Xiaonong Cheng. Effect of SiC film on tensile properties of nanostructured Ti produced by compressive deformation at liquid nitrogen temperature. Materials Science and Engineering: A, 2008, 493(1-2): 195-201. 《SCI》《EI》

2.Honghong Shao, Chunhang Yu, Xiaojing Xu, Ji Wang, Rui Zhai, Xiaojing Wang. Influence of Ti nanocrystalization on microstructure, interface bonding, surface energy and blood compatibility of surface TiO2 films. Applied Surface Engineering. 2010, 257(5): 1649-1654.《SCI》《EI》

3.Fei Zhou, Kangmin Chen, Meiling Wang, Xiaojing Xu, Hua Meng, Min Yu, Zhendong Dai. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air. Wear, 2008, 265(7-8): 1029-1037.《SCI》《EI》

4.Y.J. Chen, Y.J. Li, X.J. Xu, J. Hjelen, H.J. Roven. Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing. Materials Letters, 2014, 117: 195-198.《SCI》《EI》

5.Xu Xiaojing, Jia Weijie, Tan Cheng, Du Donghui, Huang Peng, Zhang, Chong. Microstructure evolution of 7085 aluminum with different initial deformation energy storage in fast and slow heating process. Mater. Res. Express 4 (2017) 106509.《SCI》

6.Chenyu Zhu, Xiaojing Xu, Hao Wang, Jinxin Zhu and Fan Yang. Effect of Mg on microstructure and properties of Al-8.95Zn-(1.9~2.6)Mg-1.18Cu-0.44Zr rolled aluminum alloy.  Mater. Res. Express R1 (2018) 107937.《SCI》

7.Xiaojing Xu, Chenyu Zhu, Hao Wang, Weijie Jia, Donghui Du, Chengbin Cai, Tianlun Wang. Effect of Zn/Mg and Cu/Mg on microstructure and properties of Al-xZn-3.0Mg-yCu-0.2Zr rolled aluminum alloy. Mater. Res. Express 6 (2019) 016527.《SCI》

8.Chengbin Cai, Xiaojing Xu, Jindong Huang, Shihao Ju, Qing Ding, Chengsong Wang. Effect of pre-recovery on microstructure and properties of rolled Al-12.18Zn-3.31Mg-1.43Cu-0.20Zr-0.04Sr aluminum alloy. International Journal of Minerals, Metallurgy and Materials. SCI. 2019, 26(2): 241-250.《SCI》

9.Jiang, Ze; Xu, Xiaojing; Zhu, Chenyu; Mao, Qiang; Zhang, TianCi; Wang, Hao; Jia, Weijie. Anisotropy of microstructure and properties of high strength extruded-hot pressed aluminum alloy. Mater. Res. Express. Accepted.《SCI》

10.Li, Chong; Xu, Xiaojing; Wang, Saifu; Cai, Chengbin; Ju, Shihao; Huang, Jindong; Yang, Song.  Microstructure and Properties of Al and Al-Cr coatings on nickel-based superalloy GH625 by a Thermal Diffusion Process. Mater. Res. Express. Accepted.《SCI》

11.Xu, Xiaojing; Jiang, Ze; Mao, Qiang; Zhang, Tianci; Du, Donghui; Zhu, Chenyu; Wang, Hao. Effect of multi-stage solution and aging process on microstructure and properties of AL-10.7Zn-2.8Mg-1.2Cu-0.2Zr aluminum alloy extrusion materials. Mater. Res. Express. Accepted.《SCI》

12.Liu, Zheng; Xu, Xiaojing; Zhang, Bin; Chen, Hanhui; Wang, Tianlun; Zhang, Jinsong; Zhang, Keren; Zhang, Jie; Yang, Fan. Effect of Mn Element on Microstructure and Properties of 7000 Series Ultra High Strength Rolled Aluminum Alloy. Mater. Res. Express. Accepted.《SCI》

13.Jiang, Ze; Xu, Xiaojing; Cheng, Hao; Liu,  Qing jun; Zhang, Xu; Zhou, Kai Xiang; huang, jing. Effect of submicron Sn and heat treatment temperature on corrosion resistance of Ni-P composite coatings. Mater. Res. Express. Accepted. 《SCI》

14.Tabie, Vitus; Shi, Xiaodong; Li, Jianwei; Cai, Chengbin; Li, Chong; Xu, Xiaojing. High temperature oxidation and corrosion resistances of Ti-4Si-xZr-yY2O3/5TiO2 Composites Prepared by High-Energy Milling and Cold Pressed Sintering. Mater. Res. Express. Accepted. 《SCI》

15.Wang, Tianlun; Xu, Xiaojing; Zhang, Jie; Chen, Hanhui; Zhu, Chenyu; Zhang, Jinsong; Zhang, Keren. Effect of Mg on Microstructure and Properties of 6000 Series High Strength and High Plastic Aluminum Alloy. Mater. Res. Express. Accepted. 《SCI》

16.Li Chong， Xu Xiaojing， Wang Saifu, M Vitus, Liu Zhigang, Zhang Tianci. Microstructural evolution and mechanical properties of Al-Zn-Mg-Cu alloy processed by integrated extrusion and equal channel angular pressing (iECAP) and heat treatment. Mater. Res. Express. Accepted.《SCI》

17.Xu Xiaojing, Li Chong, Wang Saifu, Tabie Vitus, Yang Song, Zhang Tianci, Liu Yangguang. High-temperature oxidation and hot corrosion behavior of the Cr-modified aluminide coating obtained by a Thermal Diffusion Process. Mater. Res. Express. Accepted. 《SCI》

18.M, Vitus; Xu, Xiaojing; Jiang, Ze; Xiaoyu, Zhang; Li, Chong; WANG, Saifu; Liu, Yang guang. Effect of extrusion-Bc ECA integration technology on microstructure and properties of Al-Zn-Mg-Cu-Zr Alloy. Mater. Res. Express. Accepted. 《SCI》

19.Qian Zhu, Chao Zhang, Jose L.Curiel-Sosa, TinhQuoc Bui, XiaojingXu. Finite element simulation of damage in fiber metal laminates under high velocity impact by projectiles with different shapes. Composite Structures. 2019, 214: 73-82. 《SCI》

20.Hongyu Liang, Yongfeng Bu, Yanhu Zhang, Xiaojing Xu, Junyan Zhang.Conversion of organic films into fluorine-containing onion carbon as anti-adhesion solid lubricants. Materials Letters, 2018, 233: 310-313.《SCI》

21.Jie Cai, Chengzuan Gao, Peng Lv, Conglin Zhang, Qingfeng Guan, Jinzhong Lu, XiaojingXu. Hot corrosion behaviour of thermally sprayed CoCrAlY coating irradiated by high-current pulsed electron beam. Journal of Alloys and Compounds, 2019, 784:1221-1233. 《SCI》

22.Lijie Zuo, Bing Ye, Jian Feng, Xiaojing Xu, Xiangyang Kong, Haiyan Jiang. Effect of δ-Al3CuNi phase and thermal exposure on microstructure and mechanical properties of Al-Si-Cu-Ni alloys. Journal of Alloys and Compounds, 2019, 791: 1015-1024. 《SCI》

23.Jie Cai, Peng Lv, Qingfeng Guan, Xiaojing Xu, Jinzhong Lu, Zhiping Wang, Zhiyong Han. Thermal Cycling Behavior of Thermal Barrier Coatings with MCrAlY Bond Coat Irradiated by High-Current Pulsed Electron Beam. ACS Applied Materials & Interfaces. 2016, 8, 32541-32556. SCI (一区), IF= 7.145

24.Song Weiwei, Xiaojing Xu. Study on the corrosion of copper alloy by friction stir surface processing. ANTI-CORROSION METHODS AND MATERIALS. 2016, 63: 190-195.《SCI》

25.Xiaojing Xu, Wei Wang and Lan Cai. Superplasticity of SiCw/Zn-22Al composites. Journal of Material Science and Technology. 2004, 20 (2): 172-174. 《SCI》《EI》

26.X. J. Xu, L. Cai and S. S. Kim. An investigation on high strain rate superplasticity of an Al-Cu-Mg-Ti-Sr ingot alloy. Mater. Sci. Forum. 2004, 471-472: 692-696. 《SCI》《EI》

27.Xu Xiaojing, Wang Wei, Cai Lan. Superplasticity of a SiC particulate reinforced 6A02Al matrix composite. Rare Metals. 2004, 23 (1): 84-87. 《SCI》《EI》

28.Xu Xiaojing, Zhao Changzheng, Zhang Di, Shi Zhongliang, and Wu Renji. High strain rate superplasticity of sic whisker reinforced pure aluminum composite. Transactions of Nonferrous Metals Society of China. 1999, 9 (3): 500. 《SCI》《EI》

29.Xiao Jing Xu, Seock Sam Kim, Kang Min Chen, Qi fu Luo, Yong Shi Zheng. Analysis of the Failure of Turbocharger Shaft Bearing in Diesel Engines. Key Engineering Materials. 2005, 297-300: 1376-1381. 《SCI》《EI》

30.Xiao Jing Xu, Seock Sam Kim, Yong Shi Zheng. Improvement of Strength in 2024 Al Alloy by Enhanced Solution Treatment. Key Engineering Materials. 2005, 297-300: 2362-2367.《SCI》《EI》

31.Xu Xiaojing, Cao Jinqi, Cheng Xiaonong, Mo Jiping. Tensile Properties of 2024 Al Alloy Processed by Enhanced Solid-Solution and Equal-Channel Angular Pressing. Transactions of Nonferrous Metals Society of China. 2006, 16(s 3): 1541-1544.《SCI》

32.Xu Xiaojing, Shi Lianjie. Low temperature superplasticity of 40Cr steel. J. Iron Steel Res.Int. 2004, 11(4): 56-58.《SCI》

33.J. Cai, P. Lv, et al., Thermal cycling behavior of thermal barrier coatings with MCrAlY bond coat irradiated by high-current pulsed electron beam, ACS Appl. Mater. Inter., 8 (47) 32541-32556. (IF=8.097)

34.J. Cai, C.Z. Gao, et al., Hot corrosion behaviour of thermally sprayed CoCrAlY coating irradiated by high-current pulsed electron beam, J. Alloys Compd., 784 (2019) 1221-1233. (IF=3.779)

35.J.Cai, Q.F. Guan, et al., Isothermal behavior ofthermal barrier coatings with CoCrAlY bond coat irradiated by high-current pulsed electron beam, Appl. Surf. Sci., 317 (2014) 360-369. (IF=4.439)

36.J. Cai, Q.F. Guan, et al., Microstructural characterization of modified YSZ thermal barrier coatings by high-current pulsed electron beam, Surf. Coat. Technol., 254 (2014) 187-194. (IF=2.906)

37.C.L. Zhang, Q. Gao, P. Lv, J. Cai*, et. al., Surface modification of Cu-W powder metallurgical alloy induced by high-current pulsed electron beam, Powder Technol., 325 (2018) 340-346. (IF=3.230)

38.Hongyu Liang, Yongfeng Bu, Junyan Zhang*, Zhongyue Cao, Aimin Liang. Graphene Oxide Film as Solid Lubricant. ACS Applied Materials & Interfaces, 2013, 5, 6369-6375（SCI，IF=8.097，1区）

39.Hongyu Liang, Yongfeng Bu*, Fuping Pan, Junyan Zhang*,Transformation of Freon to 3D graphene frameworks for high-rate supercapacitors with high capacity retention. Journal of Power Sources, 2018, 405, 1-6. （SCI，IF=6.945，1区）

40.Hongyu Liang, Yongfeng Bu, Yutian Zhang, Junyan Zhang*. Graphene Oxide as Efficient High-concentration Formaldehyde Scavenger and Reutilization in Supercapacitor. Journal of Colloid and Interface Science. 2015, 444, 109-114（SCI，IF=5.091，2区）

41.Hongyu Liang*, Yongfeng Bu, Yanhu Zhang, Xiaojing Xu, Junyan Zhang*, Conversion of organic films into fluorine-containing onion carbon as anti-adhesion solid lubricants. Materials Letters, 2018, 233, 310-313（SCI，IF=2.687，2区）

42.Hongyu Liang, Yongfeng Bu, Yan Zhou, Yongfu Wang, Junyan Zhang*. Transforming Organic Molecular Films into Carbon Films as Solid Lubricants. RSC Advances, 2015, 5, 22305-22309（SCI，IF=2.936，3区）

43.Hongyu Liang, Yongfeng Bu, Jianning Ding, Junyan Zhang*. A General Method for the Preparation of a Thickness-Controllable Fluoro-Containing Organic Film as a Solid Lubricant. RSC Advances, 2015, 5, 39884-39888（SCI，IF=2.936，3区）

44.Hongyu Liang, Xingen Hu*, Guoyong Fang, Shuang Shao, Aidi Guo, Zheng Guo. Enthalpic discrimination of position isomerism: Pairwise interaction of piperidinecarboxylic acid isomers in DMSO+H2O mixtures at 298.15K. Thermochimica Acta, 2012, 549, 140-147（SCI，IF=2.189，2区）

45.Hongyu Liang, Xingen Hu*, Guoyong Fang, Shuang Shao, Aidi Guo, Zheng Guo. Pairwise Interaction Enthalpies of Enantiomers of β-Amino Alcohols in DMSO + H2O Mixtures at 298.15 K. Chirality, 2012, 24, 374-385（SCI，IF=1.833，4区）

46.Xiaohui Yu, Huilong Dong*, Youyong Li*, "The deposition characteristics of PAN/PPY on SiO2 substrate by density functional theory (DFT) calculations", Applied Surface Science. 2018, 462, 890-5.

47.Xiaohui Yu, Huilong Dong, Lu Wang, Youyong Li*, "Strain Effects on the electronic and transport properties of TiO2 nanotubes", RSC adv., 2016, 6, 80431 - 80437

48. Xiaohui Yu, Tingjun Hou, Xuhui Sun*, Youyong Li*, Atomistic Structures and Phase Transition of In2Se3 Nanowires Studied by DFT Calculations and Synchrotron Radiation X-ray Diffraction, Solid State Communications, 2013, 162, 28-33

49.Xiaohui Yu, Tingjun Hou, Youyong Li*, Xuhui Sun*, Shuit-Tong Lee, Effective Band Gap Reduction of Titanium Oxide Semiconductors by Codoping from First-Principles Calculations, Int. J. Quant. Chem., 2013, 113, 2546-2553

50. Xiaohui Yu, Tingjun Hou, Xuhui Sun*, Youyong Li*, The Influence of Defect on Mo-Doped TiO2 by First Principles Studies, ChemPhysChem, 2012, 13(6): 1514-1521

51.Xiaohui Yu, Changsheng Li*, Hua Tang, Yun Ling, Ting-ao Tang, Qiong Wu, Junjie Kong. First Principles Study on Electronic Structures and Properties of Sn-Doped Rutile TiO2.Computational Materials Science, 2010, 49, 430-434

52.Xiaohui Yu, Changsheng Li*, Yun Ling, Ting-ao Tang, Qiong Wu, Junjie Kong. First Principles Calculations of Electronic and Optical Properties of Mo-Doped Rutile TiO2.Journal of Alloys and Compounds, 2010, 507(1): 33-37

53.Mo G L , Li Z X , Wu Z L . A theoretical model of non-deforming bullets penetrating ballistic gelatin[J]. International Journal of Impact Engineering, 2018, 114:105-110.

54.Jinming Ru, Bo Kong, Hanxing Zhu, Zhongliang Shi, Di Zhang, Tongxiang Fan*, Microstructure, capillary performance and gas permeability of biporous copper fabricated by tape casting, Powder Technology, 2014, 256: 182 - 187.

55.Jinming Ru, Bo Kong, Yaoguang Liu, Xiaolin Wang*, Tongxiang Fan*, Di Zhang, Microstructure and sound absorption of porous copper prepared by resin curing and foaming method, Materials Letters, 2015, 139: 318 - 321.

56. Jinming Ru*, Bo Kong, Tongxiang Fan, Di Zhang, Porous copper with capillary performance and gas permeability prepared by two-step foaming method, International Journal of Precision Engineering and Manufacturing, 2015, 16(7): 1461 - 1466.

57.Bo Kong, Jinming Ru, Hongdi Zhang, Tongxiang Fan*, Enhanced wetting and properties of carbon/carbon-Cu composites with Cr3C2 coatings by Cr-solution immersion method, Journal of Materials Science & Technology, 2018, 34(3): 458-465.

58.Bo Kong, Tongxiang Fan*, Jinming Ru, Improved wetting and thermal properties of graphite-Cu composite by Cr-solution immersion method, Diamond & Related Materials, 2016, 65:191-197.

59.Zhou Y H, Ju Y T, Zhou C S. Design of Flexible Wing with Embedded Piezoelectric Actuator[C]// 2nd International Conference on Manufacturing Engineering and Process, 2013, 325: 951-955.(ISTP: 20132716474661)

60.Yanhu Zhang , Jianjun Qu, Jinbang Li. Friction and wear behavior of linear standing-wave ultrasonic motors with V-shape transducers. Tribology International. 2016, 95: 95-108.

61.Jianjun Qu, Yanhu Zhang, Xiu Tian, Jinbang Li. Wear behavior of filled polymers for ultrasonic motor in vacuum environments. Wear. 2015, 322-323:108-116.

62.Jianjun Q, Yanhu Zhang, Xiu Tian, Wenfeng Guo. Mechanical and tribological properties of ekonol blends as frictional materials of ultrasonic motors. Tribology Letters. 2014, 56(2):387–395.

63.Yanhu Zhang, Jianjun Qu, Hongxiang Wang. Wear characteristics of metallic counterparts under elliptical-locus ultrasonic vibration. Applied Sciences. 2016, 6(10):289(1-13).

64.Qu, Yanyan , Zhang, Yanhu , Qu, Jianjun. Micro‐Driving behavior of carbon‐fiber‐reinforced epoxy resin for standing‐wave ultrasonic motor. Polymer Composites. 2016, 37(7): 2152–2159.

65.Ji Zhou, Shi-Kui Dong, Zhi-Hong He, Ju-Lius Caesar Puoza, Yan-Hu Zhang. Light absorption coefficients of ionic liquids under electric field. Chinese Physics B. 2019, 28(1):017801.

66.J.W. Li, X.T. Wang, Y. Qiao, Y. Zhang, Z.B. He, H.L. Zhang*: High thermal conductivity through layer optimization in diamond particles dispersed Zr-alloyed Cu matrix composites, Scripta Materialia, 109: 72-75 (2015)

67.J.W. Li, H.L. Zhang, L.H. Wang, Z.F. Che, Y. Zhang, J.G. Wang, M.J. Kim, X.T. Wang: Optimized thermal properties in diamond particles reinforced copper-titanium matrix composites produced by gas pressure infiltration, Composites Part A, 91: 189-194 (2016)

68.J.W. Li, H.L. Zhang, Y. Zhang, Z.F. Che, X.T. Wang: Microstructure and thermal conductivity of Cu/diamond composites with Ti-coated diamond particles produced by gas pressure infiltration, Journal of Alloys and Compounds, 647: 941-946 (2015)

69.L.H. Wang, J.W. Li, Z.F. Che, X.T. Wang, H.L. Zhang*, J.G. Wang*, M.J. Kim*: Combining Cr pre-coating and Cr alloying to improve the thermal conductivity of diamond particles reinforced Cu matrix composites, Journal of Alloys and Compounds, 749: 1098-1105 (2018)

70.Z.F. Che, J.W. Li, Q.X. Wang, L.H. Wang, H.L. Zhang, Y. Zhang, X.T. Wang, J.G. Wang, M.J. Kim: The formation of atomic-level interfacial layer and its effect on thermal conductivity of W-coated diamond particles reinforced Al matrix composites, Composites Part A, 107: 164-170 (2018)

71.Z.F. Che, J.W. Li, L.H. Wang, Y.X. Qi, Y. Zhang, H.L. Zhang, X.T. Wang, J.G. Wang, M.J. Kim: Effect of diamond surface chemistry and structure on the interfacial microstructure and properties of Al/diamond composites, RSC Advances, 6: 67252-67259 (2016)

72.X.K. Meng, J.Z. Zhou, C. Su, S. Huang, K.Y. Luo, J. Sheng, W.S. Tan. Residual stress relaxation and its effects on the fatigue properties of Ti6Al4V alloy strengthened by warm laser peening[J]. Materials Science & Engineering A, 2017，680：297-304.  (SCI)

73.X.K. Meng, J.Z. Zhou, C. Su, S. Huang, J. Sheng, X.W. Yang. Properties of laser shock wave in Al-Cu alloy under elevated temperatures:A molecular dynamics simulation study[J]. Materials, 2017, 10(1): 73-87.  (SCI)

74.J.Z. Zhou, X.K. Meng, S. Huang, J. Sheng, J.Z. Lu, Z.R. Yang, C. Su. Effects of warm laser peening at elevated temperature on the low-cycle fatigue behavior of Ti6Al4V alloy[J]. Materials Science & Engineering A, 2015, 643: 86-95.  ( SCI)

75.X.K. Meng, J.Z. Zhou, S. Huang, J. Sheng, W.L. Zhu, Y.H. Han, H.S. Chen, X. Feng, C. Su. Finite element simulation of residual stresses in Ti6Al4V Following warm laser peening[J]. Lasers in Engineering, 2017.36(1-3):169-184.  (SCI)

76.J.Z. Zhou, X.K. Meng, W.L. Zhu, X. Feng,J. Sheng, J.Z. Lu. Residual stress relaxation of Ti-6Al-4V alloy based on the variation of damping capacity introduced by warm laser peening[J]. Lasers in Engineering, 2017.36(1-3):73-88.  (SCI)

77.Zhou, S. D., Xi, G. N. (2015). Numerical study on characteristics of flow and thermal fields of offset cylinder arrays in the middle reynolds number range. International Journal of Refrigeration, 65, 69-79. (SCI)

78.Zhou, S. D., Xi, G. N. (2016). Numerical simulation on time-mean characteristics of flow and heat transfer of in-line double-column cylinders in the transitional flow using compound grid system. International Journal of Refrigeration, 74, 200-211. (SCI)

79.Zhou, S. D., Zhao, Z., Yan, S. F., et al. (2013). Numerical study on characteristics of flow and thermal fields of tandem cylinders. Heat Transfer Engineering, 35(35), 1144-1151. (SCI)

80.Zhou, S. D., Zhou, J., Zhao, L., et al. (2017). Experimental study on wake development in a three-cylinder model within a tunnel in transitional flow. Heat Transfer Engineering, 39 (16-17). (SCI)

81.Hao Fu, Jinghu Ji, Yonghong Fu, Xijun Hua. Influence of Donut-Shaped Bump for Hydrodynamic Lubrication of Textured Parallel Sliders[J], Journal of Tribology, 2018, 140(4), doi: 10.1115/1.4039163

82.Hao Fu, Jinghu Ji, Yonghong Fu, Shuchang Zhao, Xijun Hua. Influence of Short Grooves on Hydrodynamic Lubrication of Textured Infinitely Long Sliders[J]，Advances in Mechanical Engineering, 2018, 10(2) 1–10

83.Hao Fu, Yonghong Fu, Xijun Hua, Jinghu Ji, Zhengyang Kang, Tianyang Chen.The Key Technologies of Laser Surface Texturing and the Relative Equipments[C]，2017 World Innovation Conference, Maryland, U.S.A